Using the Cisco AnyConnect VPN Client on Windows

VPN (virtual private network) is a service hosted by Bishops and used to connect to the BU Network OFF-campus. This is typically only necessary when a user needs to access network drives, remote terminal servers, or remote desktop from OFF-campus.

  1. How to request VPN
  2. How to download
  3. How to install
  4. How to use
  5. How to mount the network drives

1. How to request VPN access:

Step 1: 

In order to get VPN access, your manager must first place a ‘VPN Setup/Config’ Service Request through the Octopus system. To place an Octopus request, please, visit: octopus.ubishops.ca

2. How to download the Cisco AnyConnect VPN Client:

Step 2.1:

Visit: vpn.ubishops.ca

Step 2.2:

Log in with your Bishop’s credentials.

If login fails, you may have entered the wrong password or your account does not have VPN access.

To request VPN access, refer to the “How to request VPN access” section.


Step 2.3:

Select Download for Windows.


Step 2.4:

Select Save File.


3. How to install the Cisco AnyConnect VPN Client:

Step 3.1:

Open the downloaded file.


Step 3.2:

Select OK if prompted to open Executable file.


Step 3.3:

Select RUN if prompted to run this file.


Step 3.4:

Follow the installer’s instruction.

It should be fine to keep clicking “Next” to get through the install process…


Step 3.5:

Select “I accept …” and Click NEXT.


Step 3.6:

Select INSTALL.


Step 3.7:

If prompted, select ‘Allow this program to make change …’

Once the installation completes, select FINISH


Your Cisco AnyConnect VPN is now installed on your computer.

4. How to use the Cisco AnyConnect VPN Client:

Step 4.1:

To open the VPN program Select the Windows’ START icon

Select the ‘Cisco’ folders

Open the ‘Cisco AnyConnect…’ program


Step 4.2:

You should see a window appear which will ask for a server name. It may already be filled in, otherwise enter “vpn.ubishops.ca” and click “Connect”. You should not have to renter this address again the next time you use the VPN, instead, it may already say “vpn” (this is OK).



Step 4.3:

Enter your BU username and password when prompted to log on. If entered correctly you should see a “Connected” message appear, and the Cisco AnyConnect icon in the System tray change to look like it is “locked”.

This means you are connected to the VPN and can access the network as if you were on campus.


Cisco AnyConnect VPN is now connected.



5. How to mount the network drives:

Step 5.1:

A few moments after the VPN connection is established you will be prompted to enter your Bishop’s credentials.

Once entered correctly, the network drives will be automatically mounted on your computer.


(Visited 90 times, 1 visits today)